user manual

Page 12 NDA-30135 Revision 1
INSTALLATION & CONFIGURATION Attendant Monitor Operations Manual
Attendant Monitor
Database (cont)
Configuring the Attendant Monitor Database
The database is initially blank. It must be configured before the Attendant Monitor
application can operate. The database values are set using the APM Applications
Manager Main Menu-- Selecting the Application Configuration option. The
general sequence is the following:
1. Build a Master Database File
Enter data into the master database fields to add the necessary Monitored
Number, Attendant Name, TTY, and Supervisor Flag values for Attendant
Monitor.
2. Process the Application Database
Use the Process Application Databases option on the APM Database
Administration menu to create the application database file.
(When the Process option is activated, data is drawn from the master database
and converted to the formats specified in the application definition file.)
3. Install the Application Database
Use the Install Application Databases option on the APM Database
Administration menu to enable Attendant Monitor to copy its database.
Note: Refer to the APM Operations Manual for more detailed instructions on adding a
database.
AMNO: PBX assignment of Monitored Number
Each monitored number that is specified in the Attendant Monitor database must
be created on the PBX using the AMNO command.
Note: Refer to the NEAX2400 IMS system manuals for detailed procedures for making
the data assignments at the NEAX MAT.
Continue to the Tenant Number database on the next page...