user manual

ISDN TERMINAL
NEAX2000 IVS
2
ISDN Features and Specifications
Page 12
NDA-24273, Issue 1.0
12. In case of Point to Multipoint connection, a Single Line Telephone/Multiline Terminal must dial ISDN
Multipoint station number assigned by CM1B, not the ISDN Terminal number assigned by CM10.
13. When a Multiline Terminal calls an ISDN Terminal or an ISDN Terminal calls a Multiline Terminal, a
calling station number is displayed to the calling Multiline Terminal or the ISDN Terminal.
In case of Point to Multipoint connection, the calling station number displayed is the ISDN station number
assigned by CM10.
14. Station to Station Calling between a PS station and an ISDN Terminal is available.
15. Only Preset Dialing can be used from an ISDN Terminal, Overlap dialing is not available.
16. For Event Based CCIS you must have 64K unrestricted digital data connections (circuit mode). The
Telephone company cannot overflow these ISDN calls to analog lines.