user manual

CHAPTER 5 ND-70185 (E)
Page 78
Revision 3.0
DATA PROGRAMMING
Assignment of Telephone Numbers
6.1.2 When FCH is Mounted in a High Density Slot
If the FCH is to be mounted in the High Density Slot, the connection trunk data should be assigned as
shown in the figures below. Figure 5-24 shows an example where these cards are mounted in Slots 11
and 12.
Figure 5-24 Mounting FCH and DTI Cards in High-Density Slots
00 02 04 05 06 07 08 09 10 13 14 15 16 17 18 19 20 21 22 23
12
13
14
15
00
01
0200
01
02 0404 0606 08 0810 10
0303 0505 0707 0909 11 11
12
13
14
15
16
17
18
19
20
21
22
23
The figure below shows an example where these cards are mounted in slots 11, and 12.
11 12
TSW/MUX
TSW/MUX
DPWR
PWR