user manual

NDA-24233 Issue 2 Page 3-75
VisuaLink 128/384 Engineering Guide Console Command List
CSPI Multiple Address Transmission Report 32-4
CRPI Specific Picture Reception Report 32-5
CVCI Talker Detection Control Report 32-6
Description: This is to report the completion of a simulcast transmission.
Command Format: CSPI p1
p1: 0-255, * : conference room number
Note 1:
When p1 = 0, it indicates a release of a multiple address
transmission in H.243 multi-point conference.
Note 2:
When p1 = *, it indicates a screen composition.
Description: This report on a completion of specific video reception process.
Command Format: CRPI p1 p2 p3
p1: 1-255 : reception side conference room number
p2: 1-255/* : transmission side conference room number
p3: ON/OFF : reception selection setting/ release
Note 1:
In a NEC specific multi-point conference, 1-14 only can be
specified.
Note 2:
In p2, * indicates a screen composition.
Description: This report the execution of an audio switch process.
Command Format: CVCI p1 p2
p1: 0-255 : audio switch control conference room number
p2: ON/OFF : audio switch execution/ release
Note:
When p1 = 0, it indicates a general setting.