user manual

Page 3-26 NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
NBZS Setting Incoming Call Buzzer 5-6
Note: This command is ineffective when setting incoming mode is set to Automatic. Utilize this command
only in the Manual Answer mode.
NBZI Checking Incoming Call Buzzer Setting 5-7
Description: Sets the incoming call buzzer in a communication using BRI ISDN, this
sets an incoming call bell to rumble when a request for a incoming call
from a remote office is received. This setting is valid only when the
incoming call setting is manual.
Command Format: NBZS p1
p1: ON : ring
OFF : no ring
Response: Normal Response: OK
Error Response: ERR01
ERR05
Description: Checks the current incoming call ring indication setting.
Command Format: NBZI
Response: Normal Response: p1 OK
p1: ON : ring
OFF : no ring
Response: ERR01
ERR05