user manual

NDA-24233 Issue 2 Page 3-61

VisuaLink 128/384 Engineering Guide Console Command List

CRPR Specific Picture Reception Request 22-3

CMPR Request to Switch Multiple Address Originator Monitor 22-4

Description: Activates or deactivates selective receive mode.

Command Format: CRPR p1 p2 p3

p1: 1-255 : reception side conference room number

p2: 1-255 : transmission side conference room number

* : composite screen display

p3: ON : reception selection setting/ release

OFF : reception selection release

Note 1:

When p1 is omitted, it becomes a local office conference room

number.

Note 2:

p1 is omitted in H.243 multi-point conference.

Note 3:

In p2, * is valid only when a MCU to connect has a capability

of screen composition. Also in a NEC specific multi-point

conference, 1-14 only can be specified.

Response: Normal Response OK

Error Response: ERR01

ERR20

ERR22

ERR23

ERR24

ERR26

Description: Request to switch the broadcasting video image at the originator’s

monitor. This command is only available when it is in a NEC specific

conference mode.

Command Format: CMPR p1