user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK 1Dl - PRIME /RINGING LINE ASSIGNMENT
1. Go off line.
OPERATION - AND v-w DISPLAY
OF F - LINE (X-XX)
PROGRAM MODE
TERMINAL
FEATURE
2. Depress Fl, then F9.
3. Depress Fll.
4.
5.
or Ringing line: Dial 2.
or Prime/Ring line: Dial 3. Depress desired line key.
(See Notes 3 & 5).
or For SLT CO Prime Line: Dial 4.
Enter desired Trunk Number (See Notes 6 & 7).
(CPU-EBB or higher.)
or For no assignment:
Dial station number to be assigned.
Example: Station 104. (See Note 1).
Dial a one digit code to select the appropriate
function (See Note 2). Prime line: dial 1 and
depress the line key (LKl-16) to be assigned.
Note 3).
PRM. /RNG. L. PREF
TEL104
xxxxxxxxx
PRM. /RNG.L.PREF
(See
TEL104
PRIME L.
PRM. / R N G . L . P R E F :’
TEL104 RINGING L
PRM. /RNG.L.PREF
TEL104
PRM. /RNG.
P R,M . /RNG.L.PREF
TEL104 -
T R U N.K ? 1
PRM. /RNG. L. PREF
TEL104 NOT 5 E T
PRM.
/RNG. L. PREF
TEL105
xxxxxxxxx
PRM. /RNG.L.PREF
TEL???
Repeat steps 5 and 6 for all subsequent stations, or
go back to step 3 to program a specific station .
Dial 0.
7.
PRM. /RNG. L. PREF
,T E L ? ? ?
6. Depress ENTER key. (See Note 4).
8. When programming is complete, depress SPKR
. .
key to go back on line.
.ij
300 - 30