user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK lD4 - TRUNK GROUP INCOMING RESTRICTION
OPERATION q- AND -w DISPLAY
1. Go off line. OF F - LINE (X.Xx)
PROGRAM MODE
2. Depress Fl, then F9.
3. Depress F14.
4. Dial station number to be assigned.
Example: Station 104. ,(See Note 1).
TERMINAL FEATURE
TRK.G
INCOM.REST
TEL???
TRK.G INCOM.REST
TEL104
5. Ll to L8 represent trunk groups 1 to 8 respectively. If no change in status is required, proceed to step 7.
6. Depress Ll to L8 to allow or deny access to the trunk groups fofjncoming calls.
LED ON = Restricted, LED OFF = Unrestricted.
7. Depress ENTER key. Repeat steps 5 - 7 for all TRK.G INCOM.REST
subsequent Multiline Terminals (See Note 2),or go T E L 1 0 5
to step 3 to restrict a specific terminal.
8. Depress SPKR key to go back on line.
300 - 36