user manual

WY FUNrTlON [c)FF I INFj
SPKR - ON/OFF Line
TEL # - Select station to be programmed
F/W (Forward) - Increment station number
CLEAR -
ENTER -
Enter assignment to each station
B/W (Backward) - Decrement the station number
GUIDE TO FEATURE PROGRAMMING
MEMORY BLOCK BEING
MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
PROGRAMMED
MUST BE PROGRAMMED HAVE TO BE PROGRAMMED
3A2,3A3,3A4
ID8 ,-
All CPU levels.
NOTES:
1. After station number is entered, the display
will show previous attendant assigned to the
station.
2. Depressing the ENTER key causes the display
to increment to the next station number.
ND-20292
CIiAPTER 3
APRIL, 1990
I
i
i
GENERAL INFORMATION - TERMINALTO AlTENDANTASSIGNMENT ;
i
i
i This area of the memory block is used to assign each station to one of the four possible associated attendants.
i
;
i If the system requires more than 2 attendants and/or more than one tenant, memory blocks 3A2 and/or 3A4 i
i must be programmed BEFORE this memory block.
.
I
.P
I
i
i ._.-.-._.-.-.-.-.-.-.-.-.-.-.-.-.-.---.-.-.-.-.-.-.-.-.-.-.-.-.-.-,-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-. ;
300 - 45