user manual

ND-20292

CHAPTER 3

APRIL, 1990

KFY FUNCTlQbl (OFF lJjjF\

ON/OF-e

TEL # - Select device to be checked

F/W (Forward) - Increment device number

CLEAR -

ENTER -

B/W (Backward) - Decrement device number

GUIDE TO FEATURE PROGRAMMING

MEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY

PROGRAMMED MUST BE PROGRAMMED HAVE ~0 BE PROGWMMED

All CPU levels.

NOTES:

1. When entering memory block lE4, the display

will default to station number information.

2. After entering device number by port (or

station number) if any DSS/BLF is associated

with this terminal, the DSS/BLF number will

be displayed to the right of the station number.

The 3rd DSS number (extreme right) on display

indicates the CO Add-On module console

number.

3. The display in step 6 shows the port and the

associated station for the DSS device entered.

4. The display in step 8 shows the station number

and the associated DSS/BLF, if any, related to

the port entered.

GENERAL INFORMATION - TERMINAL/TELEPHONE INFORMATION

;

i This area of the memory block is used to display information on terminal equipment.

For any device i

i entered, the memory block will display the station number, DSS number, port location, and DSS/BLF (if one i

i has been assigned). No changes can be made in this memory block, it is used for reference purposes only.

_._._._.-.-._._._._.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

300 - 57