user manual

ND-20292

CHAPTER3

APRIL, 1990

GUIDE TO FEATURE PROGRAMMING

MEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY

‘ROGFtAMMED MUST BE PROGRAMMED HAVETO BE PROGRAMMED

IA, lD2,2Bl,

2B7

r.-L 2D1, 4B4

CPU-EB or higher.

NOTES:

1. After Step 4, the display will show any previous

assignments.

2. The assignments made cannot be entered

unless both an SLT station number and a

TERM station number have been assigned.

3. Depressing the ENTER key will increment the

display to the next Modem Device number.

4. Depressing the CLEAR key clears the SLT and

TERM assignment and returns the program to

step 4.

GENERAL INFORMATION - MODEM POOL ASSIGNMENT

i I

! This area of the memory block is used to assign an SLI or VMI port and a Multiline Terminal equipped with i

1 a DTA-E Unit (and associated with an ESI-EB ETU) to be used by each modem in the Modem Pool.

A f

j maximum of four modems can be assigned to the Modem Pool, with each modem requiring a dedicated SLI [.

! or VMI port and a Multiline Terminal equipped for data.

i I

~.~.-.~.~.-.-.-.-.-.-.-.-.-.-.-.~.~.~.-.-.-.-.-.~.~.~.~.~.~.~.~.~.-.-.~.~~-.-.-.-.-.-.-.~.~,~.~.~.~.~.~.~.~.~.-.~

300 - 99