user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK2C2 - TRUNK GROUP TO TENANT ASSIGNMENT
OPERATION
1. Go off line.
2. Depress F2, then F8.
3. Depress F12.
7 AiVD - DISPLAY
OF F - LINE (X-XX)
PROGRAM MODE
SYS. GROUP
4. Dial tenant number (1 - 3) .
Example: Tenant 1. (See Note 1).
TRUNK. G-TENANT
TENANT?
TRUNK. G-TENANT
TENANT1
5. Depress Ll to L8 to assign the appropriate Trunk Groups to the tenant chosen. (See Note 2).
‘\
6. Depress ENTER key. (See Note 3).
,I’
TRUNK. G-TENANT
TENANT2
7. Repeat steps 5 and 6 for all subsequent tenants, or depress TEL # key to program a specific tenant.
8. Depress the SPKR key to go back on line.
300 - 108