user manual

ND-20292
CHAPTER 3
APRIL, 1990
KEY FUNCTION (OFF LINE)
/ SPKR - ON/OFF Line
TEL # - Selects Uniform Dial Number
F/W - Increments Uniform Dial Number
CLEAR - Clears previous assignment
ENTER - Enters each assignment
B/W - Decrements Uniform Dial Number
GUIDE TO FEATURE PROGRAMMING
vlEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
‘ROGRAMMED MUST BE PROGRAMMED HAVE TO BE PROGRAMMED
CPU-EB2 or higher.
NOTES:
1.
2.
3.
By default, Uniform Dial Numbers are assigned
to Trunk Access Code Group 2.
Depressing the ENTER key causes the display to
increment to the next Uniform Dial Item
Number.
The uniform dial Item Number, 01-20,
corresponds to Item Code 60-79 in Memory Block
2El.
Example:
U.D. 01 = Item Code 60 in M.B. 2El
I
i
GENERAL INFORMATION - UNIFORM DIAL TO TRUNK ACCESS CODE
i
1
i
GROUP ASSIGNMENT i
I
I
i i
! This area of the memory block is used to assign Trunk Access Code Groups to the various Uniform Dial !
i Numbers required. With Tie Line service, this assignment determines which trunks will be used when j
i accessing uniform dialing.
I
I
_.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-,-.-.-.-.-.-.-.-.-.-
300 - 117