user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK 3B2 - CENTREX RINGING ASSIGNMENT
1.
2.
3.
4.
5.
6.
7.
OPERATION
- AND - DISPLAY
Go off line.
Depress F3, then F7.
Depress F12.
Dial Trunk Group number (l-8) to be assigned.
Example: Trunk Group 1
Depress Ll to L8 to assign the appropriate ring
pattern and detection time(s) to the Trunk Group
selected. (See Note 1.)
LED ON: 1 Hz interrupted tone (0.5 sec. ON,
0.5 sec. OFF
LED OFF: 2 set ON, 4 set OFF tone (Default)
Depress ENTER key. (See Note 2).
Repeat steps 5 and 6 to assign all Trunk Groups
required, or depress TEL# to assign a specific
Trunk Group.
OFF -LINE (XdiX)
PROGRAM MODE
SYSZ. FEATURE1
CENTREX RINGING
TRUNK
GROUP?
CTX RI NG TRK.Gl
DEPRESS LINE KEY
CTX RI NG TRK.GZ
DEPRESS LINE KEY
8. Depress SPKR key to go back on line.
300-144