user manual

ND-20292
CHAPTER 3
APRIL, 1990
KEY FUNCTION (OFF LINE)
SPKR - ON/OFF Line
TEL # - Selects a new Hunt Group number
F/W - Increments extension number
CLEAR - Clears extension assignment
ENTER - Enters each assignment
B/W - Decrements extension number
GUIDE TO FEATURE PROGRAMMING
MEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
PROGRAMMED MUST BE PROGRAMMED HAVETO BE PROGRAMMED
3B5
3B7,3B8
3B6
CPU-EB3 or higher.
NOTES:
1. Only Virtual and Primary extension numbers
can be programmed as members of a HUNT
GROUP (16 max.). Pilot numbers or uniform
numbers are not accepted. The same extension
can be programmed to appear in more than
one HUNT GROUP. Also, the same extension
can be programmed to appear more than once
in a HUNT GROUP.
2. Depressing the ENTER key advances this
program to the next extension entry within the
same hunt group.
El
~‘~‘~.-.-.-.-.-.~‘~.~‘-‘-‘-‘-‘-‘-’-’-’-’-.-.-.-.-.~.-.-.~.-.-.-.-.-.~.-.-.-.~.~.~.-.-.-.-.-.-.-.-.-.~.-.~.~.~.~.~
i
i
GENERAL INFORMATION - STATION TO HUNT GROUP ASSIGNMENT i
i I
i This area of the memory block is used to assign extension numbers to the various Hunt groups (l-8).
I
I
I I
L.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.~
300-153