user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK 3BlO - LINE POOL GROUP AUTO EXTENSION ASSIGNMENT
OPERATION
- AND -w DISPLAY
1. Go off line.
2.
Depress F3, then F7.
3.
Depress F20.
4. Dial station number being assigned.
Example: Station 104
5. Each extension line position Ll to L15 required to be a Pool Auto Extension (PAE) for the station chosen
in Step 3 should be selected. (See Notes 1 & 2).
LED ON = Assign Pool Auto Extension
LED OFF = Do Not Assign pool auto extension
6. Depress ENTER key. (See Note 3).
7. Repeat Steps 5 and 6 until all desired Multiline Terminals are programmed or depress the TEL # key to
program a particular station.
8.
Depress SPKR key to go back on line.
OFF -LINE (X-XX)
PROGRAM MODE
SYSZ. FEATURE1
POOL
AUTO EXT,
TEL???
POOL AUTO EXT
TEL104
300-l 60