user manual

ND-20292

CHAPTER 3

APRIL, 1990

KEY FUNCTION (OFF LINE)

SPKR

- ON/OFF Line

TEL

# - Selects port/device number

FIW-

Increments port/device number

CLEAR -

ENTER

- Enters each port/device to be initialized

B/W -

Decrements port/device number

GUIDE TO FEATURE PROGRAMMING

MEMORY BLOCK THAT MEMORY BLOCK THAT MAY

CPU-EB3 or higher.

NOTES:

1. There are three terminal initialization modes:

Station, DSS/BLF and Port. When entering

Memory Block 3D4, the programing station will

default to station initialization.

2. Depressing the

ENTER

key causes the

particular station or DSS/BLF to be initialized.

3. If no initialization occurs due to abnormal

conditions, the station or DSS/BLF should be

disconnected and connected (by unplugging and

plugging the line cord) or the associated ES1

ETU should be initialized.

GENERAL INFORMATION - TERMINAL (TEL, DSS) INITIALIZATION

[ This area of the memory block is use to be initialize port devices including ESI-EA and ESI-EB ETUs. The i

i port device can be indexed by port, station number or DSS/BLF device number only.

.~.~‘-.-.~.-‘-.-.-.~.-.-.-.-.-.-.-.~.~.-.-.-.-.~.~.-.~.-.~.-.-.~.~.~.~.~.-.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.-.-.~.~

300 - 173