user manual

ND-20292
CHAPTER3
APRIL, 1990
KFY FUNfTlON (OFF 1 INFI
.SPKR - ON/OFF Line
TEL # - Enters new Trunk Group number
F/W - increments Trunk Group number
CLEAR -
ENTER - Enters each assignment
B/W - Decrements Trunk Groun number
GUIDE TO FEATURE PROGRAMMING
WEMORY BLOCK BEING
MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
‘ROGRAMMED
MUST BE PROGRAMMED HAVE TO BE PROGRAMMED
4El ZAlO,ZBlO,
4E2
'-“ ZCl-2C3,2C6,
2El. 4E3-4ElO
CPU-EB or higher.
NOTES:
1. After a Trunk Group has been selected, Ll and
L2 will show the previous assignment.
2. When the Trunk Group being programmed is
comprised of DID trunks, do not send dial tone to
either side.
3. Depressing the ANSWER key will automatically
bring you to Step 3.
4. Distant End L 1 3
ON
QFJ
Send Do not
System End L 2
Dial
Send
Tone Dial Tone
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
I
I
I
GENERAL INFORMATION - TLI DIAL TONE ASSIGNMENT
i
! This area of the memory block is used to assign whether or not the Electra Mark II will provide dial tone to
f either side of a Tie line for each of the Trunk Groups which are associated with TLI-E( ) ETUs.
i
I
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
300 - 221