user manual

ND-20292
CHAPTER 3
APRIL, 1990
KEY FUNCTION (OFF LINE)
SPKR - ON/OFF Line
TEL # - Enters new Trunk Group number
F/W - Increments Trunk Group number
CLEAR - Clears previous assignment
ENTER - Enters each assignment
B/W - Decrements Trunk Group number
GUIDE TO FEATURE PROGRAMMING
MEMORY BLOCK BEING
MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
PROGRAMMED MUST BE PROGRAMMED
HAVE TO BE PROGRAMMED
14E1.4E2
12A10,2BlO,
CPU-EB or higher.
NOTES:
1.
2.
3.
4.
During step 4, the display will show the previous
assignment of the selected Trunk Group.
Depressing the # key on the dial pad during step
5 will clear the additional digits assignment on
display and reset the number of digits to be
deleted
Up to three (3) additional digits can be added. Up
to three (3) digits can be deleted.
Depressing the ENTER key will automatically
return you to step 3.
i GENERAL INFORMATION - TLI DIGIT ADD / DELETE CODE ASSIGNMENT
i
! This area of the memory block is used to delete and/or add up to three (3) digits for each of the Trunk Groups
!
f which are associated with TLI-E( ) ETUs. The purpose of adding and/or deleting digits is to facilitate the - f
i connection of DID trunks and Tie Lines to the system which are supported by TLI-E( ) ETUs.
I
L.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.~
300 - 223