user manual

ND-20292
CHAPTER 3
APRIL, 1990
MEMORY BLOCK 4E9
1.
OPERATION
Go off line.
2. Depress F4, then FlO.
3. Depress F19.
4.
5.
6. Depress ENTER key. (See Note 9).
TANDEM PORT ASGN
EXT300 - HUNT. G?
TANDEM PORT ASGN
.EXT300 - HUNT. G2
‘,
TANDEM
PORT ASGN .’
EXT???
7. Repeat Steps 4 and 5 to assign all Tandem Ports required.
- TANDEM PORT TO HUNT GROUP ASSIGNMENT
--3,
-9
1 AND - DISPLAY
Enter the extension number to be assigned to the
Tandem Port Hunt Group. Example: 300. (See
Notes 2,6, & 7).
Enter the Tandem Port Hunt Group number to
be assigned to the chosen port (1 - 8). Example:
Hunt Group 2.
OF F - LINE (X.Xx)
PROGRAM MODE
TLI PROGRAMMING
TANDEM
PORT ASGN
EXT???
8. Depress SPKR key to go back on line.
300 - 234