user manual

ND-20292
CHAPTER 3
APRIL, 1990
KEY FUNCTION (OFF LINE)
SPKR - ON/OFF Line
TEL # - Select new slot information
FIW- Increments slot number
CLEAR -
ENTER -
B/W- Decrements slot number
GUIDE TO FEATURE PROGRAMMING
MEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
PROGRAMMED MUST BE PROGRAMMED HAVE TO BE PROGRAMMED
CPU-EB3 or higher.
NOTES:
1. The xxx display at the bottom row of the LCD
is the software slot assignment type and yyy
is the hardware slot (installed card) type.
Card type
co1
TLI
SLI
MFR-EA
CNF
VMI
ESI-EA
ESI-EB
ECR
2. When a slot is not installed or assigned, “NON”
is displayed.
3. If the hardware slot type is different from the
software slot type, the Interface card does not
work.
i.e. Software card type: the type that has been
recognized by the main software presently.
Hardware card type: the type which is
presently installed.
To change the software card type; reassign the
Software card in system programming. (4C-1 Card
Interface Slot Assignment).
i
i
GENERAL INFORMATION - SOFTWARE/HARDWARE SLOT STATUS /
1 This area of the memory block is used to display software/hardware information for each ETU.
300 - 249