user manual

ND-20292
CHAPTER 3
APRIL, 1990
KEY FUNCTION (OFF LINE)
SPKR - ON/OFF Line
TEL # - Select new terminal information
F/W- Increments terminal number
CLEAR -
ENTER -
B/W -
Decrements terminal number
GUIDE TO FEATURE PROGRAMMING
MEMORY BLOCK BEING MEMORY BLOCK THAT MEMORY BLOCK THAT MAY
PROGRAMMED MUST BE PROGRAMMED
HAVE TO BE PROGRAMMED
1E2
586
CPU-EB3 or higher.
NOTES:
1. The xxx display at the bottom row of the LCD is
the software terminal assignment type and yyy is
the hardware port (installed terminal) type.
2. When a terminal is not installed or assigned at the
corresponding port, NON is displayed.
3. If the hardware terminal type is different from the
software one, the terminal does not work.
i.e. Software terminal Type:
the type which
main software
recognizes.
Hardware terminal type:
the type which is
presently
installed.
If you want to change the software terminal type,
you can reassign it by system programming.
(lE-2 Terminal Add Port)
; GENERAL INFORMATION - SOFTWARE/HARDWARE TERMINAL STATUS
i
I
i This area of the memory block is used to display information of software/hardware terminal type.
i
I
300 251