user manual

ND-20292
CHAPTER 3
APRIL, 1990
.
SECTION 350
FUNCTION TIMER CHART (Contd.)
TIMER DEFINITION
TIMING VALUE
Minimum Default Maximum
Delayed Ringing
(Extension)
2D-2
Time Delay before Internal ringin
starts at stations assigned delaye i
1 sec.
10sec.
99 sec.
ringing.
Voice Mail
Automatic Dial Send
Start
2D-2 Delay time before DTMF tones are sent
to the VMI ports.
1 sec.
2 sec. 99 sec.
Delay Announce
Start Time
1st Delay Announce
Duration Time
2D-2
2D-2
Time Delay before Delay
Announcement starts.
Time Interval for the 1st Delay
Announcement message
1 sec.
1 sec.
20 sec.
10 sec.
99 sec.
Infinity
2nd Delay Announce
Duration Time
2D-2
Time Interval for the 2nd Delay
Announcement message
1 sec.
10 sec. Infinity
Automatic 2D-3
Maximum time before automatic- 10 min. 60 min. 990 min.
Disconnect Timer
disconnect of trunk to trunk connec-
tions.
DTMF Digit
4B-1,4B-6, Duration time for each digit dialed on 60 mS. 110 mS. 760 mS.
Duration (COD
4B-9 an outside line.
Trunk Hookflash
4B-1,4B-6 Duration of CO/PBX hookflash when 300 mS. 1500 1700 mS.
Km
RECALL button is depressed. mS.
Hit Protection Time
4B-2,4B-7 Minimum duration of a disconnect
Km)
si nal sent from the central office,
0 350 mS. 700 mS.
be ore the system disconnects the line. 4
Pause Time
4B-2,4B-7 Duration of pauses stored in speed dial 0 1 sec. 7 sec.
(con
memories.
D i s c o n n e c t 4B-2,4B-7 Minimum time interval after the
system releases a CO line before it can
0 300 mS. 1400 mS.
Recognition Time
(COI)
be reaccessed. (This allows time for the
CO network to also release the line. 1
Interdigital Interval 4B-2,4B-7 Minimum allowable tif”e interval
between two consecutively dialed
40 mS. 70 mS. 180 mS.
Time (COD
DTMF di ‘ts sent by the system to the
Central
&i!f
ice.
Interdigital Interval 4B-9
Minimum allowable time interval
between two consecutively dialed
40 mS. 110 mS.
180 mS.
Time (VMI)
DTMF digits sent by the system.
Hookflash Start Time 4B-3,4B-8 Minimum. hookflash duration from a
(SLT)
Single Line Tele hone in order to
IO0 mS.
300 mS. 800 mS.
receive second dial
tl one.
Hookflash End Time
4B-3,4B-8 Maximum hookflash duration from a HF Start
(SLT)
Single Line Tele hone in order to
1000 2200 mS.
receive second dial P one.
Time
mS.
Bounce Protection
4B-3,4B-8 Length of time before a valid Hookflash 0 300 mS. 1400 mS.
Time (SLT)
is detected from a Single Line
Telephone or Voice Mail System.
300-258