user manual

m-20292
CHAPTER3
APRIL, 1990
JOB SPECIFICATION SHEETS
This section consists of Job Specification Sheets that when filled out contain
all the system programming values and configuration information.
During the initial stages of system planning, the job specification sheets are
necessary for collecting information to accurately configure the installation
of the Electra Ma&II system. The customer information, as collected by the
salesperson (or installation supervisor) is recorded onto the specification
sheets. Samples of these sheets are arranged in logical order of the memory
blocks to make the system programming as efficient as possible. The first
group of sheets are used for entering station features. Line button
assignments for Multiline Terminals and DSS/BLFs as well as dialing
restrictions and class of service (as required by the customer) are listed here.
The second group of sheets are used for assigning system features.
Assignment of trunk groups, specialized services, and assignment of system
attendants are entered in this group. The last group is used for documenting
all the necessary information about the hardware configuration. This group
is very useful to service technicians who need to keep track of adds, moves,
and changes. In some cases this group is used during troubleshooting.
The first page of each job sheet includes a brief description of each column
and possible entries. After initial installation, job sheets must be kept up to
date and left on site to provide technicians with the necessary information
required when servicing the system; a duplicate copy should also be kept in
the servicing office customer’s file.
Each CPU-Et ) ETU is shipped with a copy of the complete job specification
sheet manual (ND-20234). Additional copies can be obtained by ordering
Stock Number 700402.
300-273