user manual

JOB SPECIFICATION INSTRUCTIONS FOR
MEMORY BLOCKS 4B-3, -4, -6, -7, -8, AND -9
ITEM
DESCRIPTION ENTRY
MEMORY BLOCKS 4B-3 AND 4B-8
MINIMUM TIME BEFORE SINGLE LINE TELE-
-PHONE AND/OR VOICE MAIL HOOK FLASH IS
100 - 800 (50 mS. increments)
RECOGNIZED
MAXIMUM TIME SINGLE LINE TELEPHONE
HOOK FLASH START TIME - 2200
AND/OR VOICE MAIL HOOK FLASH IS RECOGNIZED (100 mS. increments)
MEMORY BLOCK 4B-4
I
MEMORY BLOCK 4B-6
LAPSED TIME AFTER HOOK FLASH BEFORE
DETECTING ON-HOOK CONDITION
ASSIGNMENT OF DATA OPTION*
ASSIGNMENT OF DUAL PATH OPTION*
CHANNEL STATION IS ASSIGNED TO
SLOT STATION IS ASSIGNED TO
MODULE STATION IS CONNECTED TO
EXTENSION NUMBER OF STATION
DURATION OF CO HOOK FLASH
(RECALL KEY) SIGNAL
DURATION OF EACH PUSHBUTTON DIGIT
DISCONNECT SIGNAL FROM CO
TYPE OF LINE
TYPE OF DIALING SCHEME OF CO
SPEED OF ROTARY PULSES SENT TO CO
INTERDIGIT INTERVAL DIALING TIME
SPEED DIAL PAUSE TIME
CO DISCONNECT RECOGNITION TIME
CO LINE HIT PROTECTION TIME
INTERDIGIT INTERVAL DIALING TIME
SPEED DIAL PAUSE TIME
0 - 1400 (100 mS. increments)
J
IF PROVIDED
d
IF PROVIDED
1-4
l-8
l-3
100 - 899 OR 1000 - 8999
300 - 1700 (100 mS. increments)
DISCONNECT TIME
DURATION OF EACH PUSHBUTTON DIGIT
300 - 314
60 - 760 (50 mS. increments)
YES OR NO
CO OR PBX
DTMF OR DP
10OR20PPS
40 - 180 (10 mS. increments)
0 - 7000 (500 mS. increments)
0 - 1400 (100 mS. increments)
0 - 700 (50 mS. increments)
40 - 180 (10 mS. increments)
0 - 7000 (500 mS. increments)
500 - 3300 (200 mS. increments)
60 - 760 (50 mS. increments)