user manual

JOB SPECIFICATION INSTRUCTIONS
FOR MEMORY BLOCKS 4E-4, -5, AND -6 TLI INITIALIZED VALUES
ITEM
I
MEMORY
BLOCK
I
4E-l
ITEM
DEFAULT
PAUSE
TIME
1000 Ins.
PRE PAUSE
CO ANSWER CO RELEASE
TIME
DETECT
DETECT
3 see.
520 mS.
520 mS.
4E-5
180 mS. 300 mS.
4E-6
I
DESCRIPTION
0
1 DURATION OF FORCED GROUND
BETWEEN PULSED DIGITS.
0
2 LAPSED TIME BEFORE SENDING PULSED
DIGITS TO CO AFTER DISTANT END GOES
ENTRY
0 - 7000 mS. (500mS. INCREMENTS).
0
OFF-HOOK.
3 MINIMUM TIME INTERVAL AFTER THE CALLED
PARTY ANSWERS BEFORE A CONVERSATION
MAY START.
0 - 12 SECONDS (O-2 SECONDS
IN 500 mS. INCREMENTS;
2-12 IN 1 SECOND INCREMENTS).
0 - 1820 mS. (130mS. INCREMENTS).
MINIMUM TIME AFTER HANGING UP BEFORE
0 - 1820 mS. (130mS. INCREMENTS).
- M LEAD RECOGNIZES A DISCONNECT FROM
THE CO.
0
5 TIME DURATION LAPSED BEFORE RECOGNIZING
AN OFF-HOOK CONDITION FROM THE CO WITH A
DELAY OR WINK SIGNAL.
0
6 LAPSED TIME AFTER LOCAL STATION ANSWERS
BEFORE A VOICE PATH IS ESTABLISHED.
f;77
LENGTH OF WINK SIGNAL SEND TO THE DISTANT
LEND.
0
8 LENGTH OF DELAY SIGNAL SEND TO THE DISTANT
END.
0
9 THE LENGTH OF TIME, IN SECONDS, THAT THE
SYSTEM WILL MONITOR THE CENTRAL OFFICE
LINE FOR RECEIPT OF A WINK SIGNAL.
0
10 LENGTH OFTIME THE SYSTEM WILL NOT
ORIGINATE AFTER HANGING UP.
0
11 WHEN USING A TANDEM PORT, TIIE MAXIMUM
TIME BEFORE THE VOICE PATH IS ESTABLISHED,
AFTER DIALING THE FIRST DIGIT, AND BETWEEN
EACH DIGIT DIALED.
FOR WINK START =
O-1820mS. (130 mS.
INCREMENTS)
FOR DELAY DIALING = O-420mS. (30mS.
INCREMENTS)
O-12 SECONDS (FROM O-2 SECONDS IN 500 mS.
INCREMENTS; FROM 2-12 SECONDS IN 1 SECOND
INCREMENTS).
30mS. - 450 mS. (30mS. INCREMENTS)
0 - 4200 mS. (300mS. INCREMENTS)
1 - 14SECOND ORm(l-14SECONDSIN 1 SECOND
INCREMENTS).
1 - 9 SECONDS
2 - 28 SECONDS OR m (2-28 SECONDS IN 2 SECOND
INCREMENTS).
300-320