user manual

JOB SPECIFICATION INSTRUCTIONS FOR MEMORY BLOCKS 4E-9 & 4E-10 - TLI
PARAMETERS AND MEMORY BLOCKS 2B-10 & 2C-6 - UNIFORM DIALING
ITEM
DESCRIPTION
1 MEMORY BLOCK 4E-9 1
TANDEM
PORT
HARDWARE HUNT
SOFTWARE
GROUP
(l-8)
ASSIGNS A TANDEM HUNT GROUP
TO A TANDEM PORT.
ASSIGNS HARDWARE AND SOFTWARE
TANDEM PORTS. HARDWARE PORTS ARE
ASSIGNED TO EXISTING ES1 PORTS; SOFTWARE
PORTS ARE ASSIGNED TO IMAGINARY PORTS.
SELECTS A TANDEM PORT
1
q
TANDEM HUNT GROUP ASSIGNED TO EACH
2
TRUNK GROUP.
MEMORY BLOCK 28-10
RECALL KEY OPERATION ON
ASSIGNS INTERNAL OR TIE LINE DIAL
TIE LINES (INTRIE) (DEFAULT INT)
0
TONE WHEN THE RECALL KEY IS
MEMORY BLOCK 2C-6
UNIFORM DIAL TRUNK ACCESS CODE
NUMBER(01 - 20) GROUP (2 - 8)
a.-----
SELECTS A UNIFORM DIAL NUMBER.
SELECTS A TRUNK ACCESS CODE GROUP FOR
THE UNIFORM DIAL NUMBER SELECTED.
ENTRY
l-8
HARDWARE OR
SOFTWARE
100 - 899 OR 1000 - 8999
l-8
INT OR TIE
01 - 20
2-8
300 - 324