user manual

e. Consecutive Dialing:
SAMPLE LED INDICATIONS SAMPLE LCD INDICATIONS
l Depress an idle COIPBXTl’ie line key on the
CO Add-On Module.
green LED on the CO
l Lift handset to receive dial tone,
0 Use any combination of manual dialing,
station speed dialing and system speed
dialing.
Add-On Module lights,
0 Converse with called party.
NOTE:
An additional dialing step may be required
in the following cases:
1. When a system speed dialing sequence
follows a manual dialing sequence, DSS key
programmed for speed dial access must be
depressed before accessing the system speed
dialing.
2. When a system speed dialing sequence
follows a station or another system speed
dialing sequence, DSS key programmed for
speed dial access must be depressed before
accessing the system speed dialing unless
the last digit of number stored in the
preceding speed dial buff’er is *.
3. When a station speed dialing sequence
(using # followed by speed dial buffer
number) follows a manual dialing sequence,
it does not function.
4. When a station speed dialing sequence
(using # followed by speed dial buffer
number) follows a system or another station
speed dialing sequence, it does not function
unless the last digit of numbers stored in the
preceding speed dial buffer is *.
ND-20292
CHAPTER 4
APRIL, 1990
1 1 1 ICI01 1 ILlI INId 1 1 1
1101 :I4151 IoIcITI 12181 IFIRI I
1 1 1 1 1 14181315171619181211
1101 :I4151 IoIcITI 12181 1~1~11
EILIAIPISIEIDI 1 I 1 lOjOl :I217
ilol :I4151 IoIcITI 12181 1~1~11
400- 115