user manual

NIJ-IUZYI
CHAPTER 4
APRIL, 1990
NOTE 2:
NOTE 3:
NOTE 4:
NOTE 5:
NOTE 6:
When changing trunk access code and
telephone number to be stored, skip step d,
and perform steps e, f, g and h.
SAMPLE LED INDICATIONS SAMPLE LCD INDICATIONS
A maximum of 7 characters can be entered
for name.
A maximum of 16 digits can be entered for
a telephone number.
When a system speed dial number has to be
entered into a speed dial buffer, enter a
trunk access code, depress ANS key
(instead of dialing #) and enter a system
dial buffer number (20-99). If a pause is
required anywhere in the dialing of the
number, depress the TRF key (each
depression counts as one of the 16 digits).
Hookflash (RECALL key) signal can be
programmed as the first digit of a Speed
Dial number. Hookflash counts as 1 digit.
SPD TRK AC73
5167537000
C H A R 1, E S P A IT I,
2. To Verify
l Select page as described in Section 450.2.
l Depress desired DSS key; contents of
station speed dial will be shown for 10
seconds.
3. To Clear
a Select page as described in Section 450.2. ,,
b. Depress CNF key.
CNF LED flutters.
400 - 170