user manual

NEC AMERICA, INC.
BUSINESS SYSTEMS DlVlSlON
ET1 NUMBER: MK-002
DATE: MARCH, 1987
L’7.
PANASONIC AUTODIALER CONNECTION
1. DESCRIPTION
This Engineering Technical Information (ET11 Bulletin describes the steps necessary to install an ADA-E
(Ancillary Device Adapter) unit into an ETE-GD-1, ETE-IGD-1, ETE-16K-1, or ETE-6-1 Multiline
Terminal, to provide for connection and operation of a Panasonic Autodialer (Models KX-T1225/KX-T1235).
2.
LIMITATIONS
2.1 The dialer must be manually turned OFF after the call is established.
2.2 The dialer cannot be used for intercom calls or for most functions requiring an access code
2.3 The dialer bypasses both Toll Restriction and LCR
2.4 The digits dialed, from the dialer, will not appear on the SMDR printout.
3.
PARTS REQUIRED
3.1
3.2
3.3
3.4
3.5
ADA-E Unit Adapter Kit (Stock # 700340).
Panasonic Autodialer (KX-T1225/KX-T1235).
l&l-35X modular jack.
Eight small spade lugs.
Approximately 7 feet of four conductor station wire cable; enough to reach from the Multiline
Terminal to the W-35X.
3.6
Electra Mark II Multiline Terminal.
4. OPERATION
4.1 Access an idle CO/PBX line.
4.2 On the Autodialer, depress the ON/OFF button; then depress the desired Speed Dial button.
4.3 Monitor the call through the speaker of the Autodialer.
lof 6