user manual

ND-20292
CHAPTER 2
APRIL, 1990
INCOMING CALLS Incoming Call Without an Account Code:
07/04/86 09:OOAM 08-05 IC 120
00:15:32
TRANSFERRED CALLS Transferred Call Without an Account Code:
~~04&8E509:00AM : . 08-05 IT TL 1 ?_u
Incoming Call With an Account Code:
07104f86 09:OOAM 08-05 IC 120
00:15:32
3 4L 562
Account Code (Max. 14
characters)
Transferred Call With an Account Code:
07/04/86 00:05:45 09:OOAM 08-05
IT 120 123
345621798
Transferred Station Number
I
* Transferring Station Number
CONFERENCE CALLS Aconference call is printed in the folio
07/04!26 09:OOAM 08-05 OG
Printed when a conference is
00:03:15 102885167537000
* established with station 123
I
07/04/86 09:03AM O&O5 OGC 120
I-* up on the conference
Printed when station 120 hangs
00:06:45
I
07/04/86 09:lOAM 08-05 OT 120 123 1
_ Printed when st
00:04:30
up on the call
ation 123 hangs
OUTGOING CALLS USING SYSTEM SPEED DiAL
07fO4186 09:OOAM 08-05 OG 120
00:15:32x
I System Speed Dial: S followed by system speed
dial buffer number (Total of 3 characters)
Figure ZOO-29 SMDR Sample Printouts ofCal Records
96x 100
48
24
12
6
3
1.5
ON OFF
Figure 200-30 LCR-E ETU DIP1 Switch
r
\
SW1
ON
OFF
II
c
7
Figure 200-31 LCR-E ETU Switch Layout
B. A 25 pin RS-232C connector is provided to
connect the portable computer in order to
input necessary data into the LCR-E ETU.
C. Route the RS-232C connector ended cable
down to the right side of the CCU in such a
way as to avoid interference with the
insertion and removal of ETUs and with the
25 pair cables from the Jl - 53 connectors.
Remove the access panel on the right side of the CCU,
which covers three openings, provided to mount
RS-232C connectors. (See Figure 200-26).
Mount the RS-232C connector in one of these openings
using screws and nuts locally provided. (See Figure
200-27).
D. Connect the portable computer to the RS-
232C connector mounted on the CCU in step
C and secure the RS-232C male connector
from the computer using screws locally
provided.
E. Turn ON SW2 on the LCR-E ETU.
200-31