user manual

ET1 NUMRER: MK-005

DATE: OCTOHER, 1987

4.18 Reinstall the handset and modular line cords onto the Multiline Terminal.

OPERATION

NOTE: The following is the

current

operation of the D-4800 Autodialer.

5.1 Refer to the D-4800 Users Guide for programming and operation instructions.

5.2 Apply power to the Autodialer by first connecting the Autodialer AC adaptor to the Autodialer, then

plugging it into a convenient AC outlet (the Autodialer does not have an ON/OFF switch).

Autodialer displ.ay shows: DIRECTORY DIALER

NOTE: Steps 5.3 thru 5.9 refer to the Autodialcr’s keyboard and display.

5.3 Depress the CLEAR and SPACE buttons.

The display shows: SETUP:

5.4 Type INIT and depress the ENTER button.

The display shows: INITIALIZE?(Y)

5.5 Type Y.

The display shows: ARE YOU SURE?(Y)

5.6 Type Y.

Display shows: TESTING MEMORY and then changes to DIRECTORY DIALER

5.7 Depress the CLEAR and SPACE buttons.

Display shows: SETUP:

5.8 Type AUXMODE and depress the ENTER button

Display shows: AUX l-ON 2-OFF

5.9 Type 1.

Display shows: DIRECTORY DIALER

NOTE: The Autodialer is now ready for programming with instructions provided in the 11-4800 Users Guide.

5.10 Program the Autodialer.

5.11 After programming the Autodialer, test both the Autodialer and the Multiline Terminal for proper

operation.

3of 6