user manual

NEC AMERICA, INC.
BUSINESS SYSTEMS DIVISION
A/FORMA T/On
ET1 NUMBER: MK-911
DATE: May, 1988
CONNECTION OF AUDIO-TAPE RECORDER TO
THE ELECTRA MARK11
1. DESCRIPTION
This Engineering Technical Information (ET11 Bulletin describes the steps necessary to install an ADA-E
(Ancillary Device Adaptor1 into an ETE-GD-1, ETE-16D-1, ETE-16K-1, or ETE-6-1 Multiline Terminal, for
the connection and operation of a cassette tape recorder with remote controlled microphone.
2. LIMITATIONS
2.1 For the recorder to function automatically, the handset must be used.
2.2 To rewind or playback the recordings, the remote plug must be removed from its corresponding jack.
CAUTION: THE USE OF A MONITORING DEVICE TO EAVESDROP OR RECORD TELEPHONE
CONVERSATIONS MAY CONSTITUTE AN ILLEGAL INVASION OF PRIVACY UNDER SOME
CIRCUMSTANCES AND LAWS. YOU SHOULD CONSULT A LEGAL ADVISOR PRIOR TO
IMPLEMENTING ANY PRACTICE INVOLVING RECORDING OFTELEPHONE CALLS.
FCC ORDER IN DOCKET #26949 PERMITS THE USE OF BEEP TONE -OR- THE CONSENT OF ALL
PARTIES WHEN CONVERSATIONS ARE RECORDED. SECTIONS 2510 TO 2520 OF THE U.S.
CRIMINAL CODE (18U.S.C.2510 et seq.1 PROVIDES STIFF PENALTIES FO-R UNAUTHORIZED
DISCLOSURE OF WIRE OR ORAL COMMUNICATIONS.
3.
PARTS REQUIRED
3.1 ADA-E Adaptor kit. (Stock #700340)
3.2 Cassette tape recorder.
NOTE: The recorder must have remote microphone capability to be automatically triggered by hookswitch.
3.3 One l/8 inch Mini Phone Plug.
3.4 One 3/32 Micro Phone Plug.
3.5 #22 AWG four conductor stranded cable.
3.6 Four small spade lug terminals to lit wires in step 3.5 (locally provided).
1 of 6