user manual

ETI NUMBER: MK-012A
8. TESTING
After installation and programming is completed, test the operation as follows:
8.1
8.2
8.3
Render all extensions in the Hunt Group busy and call the pilot number of the DIT Hunt Group.
8.1.1 Go off hook.
8.1.2
Seize a trunk with either an access code or a line key.
8.1.3
Dial the seven digit phone number of the Hunt Group.
Do not answer and note that the caller is provided’ with the first announcement, then’ MOH, then the
second announcement, then MOH, then the second announcement again, then MOH, and so on. Establish
that the recording repeats until the call is automatically terminated by the Delay Announcement Auto
Release Timer (10 minutes).
Render all extensions in the Hunt Group busy and make multiple simultaneous calls to the pilot number of
the DIT Hunt Group (see 8.1 - 8.1.3). Do not answer and note that callers are connected to the prerecorded
announcements. Answer each call and establish that the recording is released and normal conversations
can ensue.
5OF7