user manual

CONNECTION OF PLANTRONICS PHONEBEAM

SPEAKERPHONE TO A Dterm II (ETE-1-2)

Dterm II

ETI NUMBER: DS-001 DATE: APRIL, 1999

1. DESCRIPTION

This Engineering Technical Information (ETI) Bulletin provides installation instructions for connecting a

Plantronics phonebeam speakerphone to a Dterm II telephone (ETE-1-2).

2. LIMITATIONS

2.1 Dterm II can transmit only when speakerphone is turned off.

2.2 Speakerphone can transmit only when the Dterm II is on-hook.

3. PARTS REQUIRED

3.1 Dterm II (ETE-l-2).

3.2 PIANTRONICS Phonebeam Speakerphone.

3.3 Electrical insulation tape.

3.4 Needlenose pliers

4. REFERENCES

4.1 PIANTRONICS installation manual 15499-01.

4.2 Dterm II (ETE-l-2) User Guide.

5. OPERATlON

5.1 Initiating calls

A. Initiate calls by going off-hook with the Dterm II handset (Speakerphone turned “OFF”),

B. Depress the “ON” key on the Speakerphone (Dterm II on-hook),

Switch the remote microphone unit of the phonebeam speakerphone to the “ON” position and then

hang up the handset.

1OFS