user manual

ETI NUMBER: DS-001
5.2 Transferring calls
A. From Dterm II handset to Speakerphone; depress “ON” key on speakerphone,
OR
Switch remote microphone unit to “ON” position and then hang up the handset.
B. From Speakerphone to Dterm II handset; lift the handset of the Dterm II and then turn off the
Speakerphone.
6. PROCEDURE
6.1
6.2
6.3
6.4
6.5
Disconnect the line and handset cord from the Dterm Telephone.
Place the Dterm II upside down on a clean flat work surface.
Slide the Directory out and place it aside.
c
Remove the access panel by applying pressure (at the notch of the panel) and slide the access panel out as
shown in Figure 1.
Apply Pressure and
ut the Access Panel
Dterm II Telephone
Figure 1. Access Panel Removal
Connect the leads from the Speakerphone as shown in Table - 1 and Figure 2. (Spade lug H4 can be
accessed by using Needlenose pliers.)
_ ’
2OF5