user manual

ETI NUMBER: OS-002
6.8 Following the pre-molded guides inside the access panel cover assembly, cut the notch and route the
Speakerphone cable through this notch. (See Figure 4.)
6.9 insulate spare Phonebeam wires with electrical tape. Store these wires in a neat bundle inside the access
panel cover.
6.10 Attach the access panel cover to the Dterm II main body.
6.11 Connect the line and handset cords to the Dterm II.
6.12 Plug the Companion 2 power supply into a local 110/12OV ac outlet
6.13 Test for normal operation.
Cable
Figure 4.
Speakerphone Cable Exit Groove on Dterm II Telephone
5OF5