user manual

CONNECTION OF AUDIO TAPE RECORDER
TO A Dterm II (ETE-1-2)
Dterm II
ETI NUMBER: DS-005 DATE: APRIL, 1990
1. DESCRIPTION
This Engineering Technical Information (ETI) Bulletin provides installation instructions for connecting an Audio
Tape Recorder to a Dterm II telephone (ETE-1-2).
2. LIMITATIONS
2.1 For the tape recorder to function automatically, the handset must be used
2.2 To rewind or play back recordings, the remote plug must be removed from its corresponding jack
CAUTION: THE USE OF A MONITORING DEVICE TO EAVESDROP OR RECORD TELEPHONE CONVERSATIONS MAY
CONSTITUTE AN ILLEGAL INVASION OF PRIVACY UNDER SOME CIRCUMSTANCES AND LAWS. YOU
SHOULD CONSULT A LEGAL ADVISOR PRIOR TO IMPLEMENTING ANY PRACTICE INVOLVING
RECORDING OF TELEPHONE CALLS.
FCC ORDER IN DOCKET # 20940 PERMITS THE USE OF BEEP TONE - OR - THE CONSENT OF ALL THE
PARTIES WHEN CONVERSATIONS ARE RECORDED. SECTIONS 2510 TO 2520 OF THE U. S. CRIMINAL
CODE (U.S.C. 2510 etseg) PROVIDES STIFF PENALTIES FOR UNAUTHORIZED DISCLOSURE OF WIRE OR
ORAL COMMUNICATIONS.
NOTE:
Dterm II is designed for dual way communication i.e., t.he message or beep tone can be played from a tape
recorder and be communicated to called or calling parties (conversations can be recorded).
3. PARTS REQUIRED
3.1 Dterm II (ETE-1-2).
3.2 Cassette tape recorder.
NOTE: Any tape recorder with remote control capability to be started automatically via hookswitch may be used.
3.3 One l/8” Mini phone plug.
3.4 One 3/32” Micro phone plug.
3.5 #22 AWG four conductor stranded cable.
3.6 Four small spade lug terminals to fit wires in step 3.5.
3.7 Phillips head screwdriver.
4. REFERENCES
NONE
5. OPERATION
5.1 Plug the tape recorder into a 11 O-l 2OV ac power outlet.
5.2 Inset-t the tape cassette into the tape recorder.
5.3 Establish the call and press the PLAY button to transmit any beep tone to the called party to indicate that
the conversation is being recorded.
1 OF5