user manual

.:
..!
ETI NUMBER: DS-005
Cable Exit Groove
Figure 4.
Tape Recorder Cable Exit Groove on Dterm II Telephone
6.10 Attach the access panel cover to the Dterm II main body.
6.11 insert the l/8” mini plug and the 3/32” micro plug into the respective tape recorder jacks.
6.12 Connect the line and handset cords to the Dterm II.
6.13 Test for normal operation.
A.
8.
C.
D.
E.
F.
G.
Plug the tape recorder into a 1 IO-12OV ac power supply.
Insert the tape cassette into the tape recorder.
Establish a call using the handset.
Speak in a normal voice and verify that the tape recorder is activated.
With the handset off-hook, remove the Remote plug from its jack.
Rewind the tape and press PLAY to verify that the test recording was taped.
Reinsert the Remote plug and hang up the handset.
5OF5