user manual

ETI NUMBER: OS-006
6. PROCEDURE
6.1 Disconnect the line cord of the Dterm II telephone from the RJll wall jack.
6.2 Plug the Dterm II telephone line cord into the T-adapter jack marked “PH”
6.3 Insert the Companion 45 line cord into the jack in the base of the unit. Insert the other end of Companion
45 line cord into the T-adapter jack marked “HF”.
6.4 Plug the l-adapter in the RJl 1 wall jack.
6.5 Plug the Transformer into a local 1 lo-120V ac outlet. Refer to Figure 1. for connection of Companion 45 to
a Dterm Telephone.
t---.
0
AC OUTLET
I I
0
Step 6.5
A
TRANSFORMER
OTERM TELEPHOE
COMPANION 45 (NT1 LO6
Figure 1. Connecting Companion 45 to a Dterm II Telephone (ETE-l-2 or ETE-lHM-2)
6.6 Test the following steps for normal operation.
A. Press the “ON” button on the Companion 45 (dial tone should be heard and the red LED should light).
B. Place a call using the Companion 45 dial pad. After the call is established, pick up the Dterm handset
(the Red LED will go off) and verify proper communication. Transfer the call back to the Companion
45 by pressing the “ON” button (the Red LED will blink).
C. Release the call by pressing the “RLS” key, the line connection and LED will go off.
,
_ ,’
2OF2