user manual

.
NEC America, Inc.
Switchina Terminals Division
Dterm SERIES II
ET1 NUMBER: DT-001
DATE: DECEMBER 1988
PLANTRONICS is-1 80 JACKET CONNECTION
1. DESCRIPTION
This Engineering Technical Information (ET11 Bulletin describes the steps necessary to install an ADA-E (Ancillary
Device Adapter) unit into an ETE-6D-2, ETE-16D-2, ETE-16-2, or ETE-6-2 Multiline Terminal, to provide for connectio
and operation of a Plantronics Jackset (Model JS-180).
2:
2.1
2.2
2.3
2.4
3.
3.1
3.2
The call can be terminated by moving the “Rocker Switch” to the OFF position.
3.3
The LMultiline Terminal is seen as OFF-HOOK when the Jackset is turned on, therefore, it may be desirable to
program the Multiline Terminal for off-hook ringing.
4.
4.1
4.2
Disconnect the modular line cord from under the telephone and from the RJ-llC/W jack.
PARTS REQUIRED
ADA-E Unit Adapter Kit (Stock # 5602801
JS-180 Jackset
Compatible Headset
Dterm Series II Multiline Terminal
OPERATION
By moving the Jackset “Rocker Switch” to the ON position, the Dterm Series [I Multiline Terminal will go into tk
OFF-HOOK condition. The operator can now talk over the headset, after depressing a CO or extension line key o
the Multiline Terminal.
PROCEDURE
Turn the Multiline Terminal upside down (face down) and locate the access panel on the bottom of the Multiline
Terminal, refer to Figure 1.
1 of 5