user manual

NEC America, Inc.
Switching Terminals Division
!
FORMAT/ON
Dterm SERIES II
ET1 NUMBER: DT-994
DATE: JANUARY, 1989
CONNECTION OF AUDIO TAPE RECORDER TO
Dterm Series II TERMINALS
1.
DESCRIPTION
This Engineering Technical Information (ETI) Bulletin describes the steps necessary to install an ADA-E
(Ancillary Device Adaptor) into an ETE-6D-2, ETE-16D-2, ETE-16-2, or ETE-6-2 Multiline Terminal, for the
connection and operation of a cassette tape recorder with remote controlled microphone.
2. LIMITATIONS
2.1 For the recorder to function automatically, the handset must be used.
2.2 To rewind or playback the recordings, the remote plug must be removed from its corresponding jack.
CAUTION: THE USE OF A MONITORING DEVICE TO EAVESDROP OR RECORD TELEPHONE
CONVERSATIONS MAY CONSTITUTE AN ILLEGAL INVASION OF PRIVACY UNDER SOME
CIRCUMSTANCES AND LAWS. YOU SHOULD CONSULT A LEGAL ADVISOR PRIOR TO
IMPLEMENTING ANY PRACTICE INVOLVING RECORDING OF TELEPHONE CALLS.
FCC ORDER IN DOCKET #20940 PERMITS THE USE OF BEEP TONE -OR- THE CONSENT OF ALL
PARTIES WHEN CONVERSATIONS ARE RECORDED. SECTIONS 2510 TO 2520 OF THE U.S.
CRIMINAL CODE (18U.S.C.2510 et seq.) PROVIDES STIFF PENALTIES FOR UNAUTHORIZED
DISCLOSURE OF WIRE OR ORAL COMMUNICATIONS.
3. PARTS REQUIRED
3.1 ADA-E Adaptor kit. (Stock #560280)
3.2 Cassette tape recorder.
NOTE: The recorder must have remote microphone capability to be automatically triggered by hookswitch.
3.3 One l/8 inch Mini Phone Plug.
1 of 6