user manual

ET1 NUMBER: DT-004

DATE: JANUARY

1989

NOTE:

Two access panels are provided with the ADA-E kit; a narrow panel to be used with ETE-6-2 or

ETE-16-2 Multiline Terminals and a wide panel to be used with all other terminals. Ensure the correct

access panel is used.

4.14 Route the locally provided station wire (already connected to the ADA-E unit) through one of the two

notched grooves on the access panel. Install the access panel.

4.15 Slide the directory back into place, ifrequired.

4.16 Reinstall the handset and modular line cords onto the Multiline Terminal.

4.17 Inert the l/8 mini plug and the 3/32 micro plug intotheir respective tape recorder jacks (See Figure 2).

4.18 Plug the tape recorder into an AC power outlet; insert a tape cassette into the tape recorder and

depress the RECORD and PLAY buttons simultaneously.

TESTING

5.1 Establish a call using the handset. Speak in a normal voice and verify that the tape recorder is

activated. With the handset still off-hook, remove the

REMOTE

plug from its jack, rewind the tape

and verify that the recording took place (If the tape recorder is equipped with a recording level control

the level may have to be adjusted).

5.2 Reconnect the REMOTE plug and hang up the handset.

3of6