user manual

ETI NUMBER: DT-006
6.12 install the ADA-E unit with the component side down ensuring the wires are not pinched. Secure the
ADA-E unit to the terminal housing with the screw provided as shown in Figure 3a. (ETEdD-0, ETE-16D-0,
or ETE-16K-1) or 3b (ETE-6-O or ETE-16-O).
NOTE
Two access panels are provided with the ADA-E kit; a narrow panel
to be used with ETE-6-0, or ETE-16-O Multiline Terminals and a wide
panel to be used with all other terminals. Ensure the correct access
panel is used.
6.13 Route the Speakerphone wires (already connected to the ADA-E unit) through one of the two notched
grooves on the access panel. Install the access panel. :
6.14 Slide the Multiline Terminal directory back into place, if required.
6.15 Reinstall the handset line cord onto the Multiline Terminal.
6.16 Plug the AC adaptor to the Speakerphone first, then plug it into a convenient AC outlet.
6.17 Refer to the Speakerphone’s user guide and test both the Speakerphone and the Multiline Terminal for
proper operation.
3of7