user manual

ND-20292
CHAPTER 7
APRIL, 1990
NOTE 5:
SAMPLE LCD INDICATIONS
1
Selection of CHK(check) tells the LCR-E to
look in an office code table for the central
office code dialed by the user to determine
whether to dial the digit 1 before dialing the
number dialed by the user. It is required
that an entry of an office code table number
be made when this option is selected.
l Example of Service Area Check:
.
l Depress Space Bar:
TE
TABLE MODIFY***
.
**
***
***
***
SRVAREACHK
i NO
NOTE 1:
NOTE 2:
NOTE 3:
NOTE 4:
When the SRV AREA CHK entry is blank
(***) use of the Space Bar provides NO as
the selected option.
Repeated use of the Space Bar will cause the
selected option to alternate between NO and
CHK. The c arrow key should be used to
position the cursor towards CHK, when
alternating from CHK to NO.
Selection of NO tells the LCR-E that no
check of an office code table is necessary.
This option is used when the number dialed
by the user is being routed to a line which
will p& use an OCC (Other Common
Carrier). This option can also be selected if
the OCC has no limitation relative to office
code dialed by the user.
Selection of CHK (check) tells the LCR-E to
look in an office code table for the central
office code which the user dialed to
determine whether this number can be
dialed via the selected route. This option is
used to determine whether the selected
route, to which the user is being routed,
provides service to the specified office code
area.
700 - 26