user manual

ND-20292
CHAPTER 7
APRIL, 1990
The use of DEL allows the programmer to delete the
character located at the present cursor position. An
example of both INS and DEL use follows.
0
INS Key example:
l
Depress INS key:
0
Depress 0 :
SAMPLE LCD INDICATIONS
***EXTRA CODE TABLE MODIFY***
***EXTRA CODE TABLE MODIFY***
I
INS MODE
I
***EXTRACODE TABLE MODIFY***
EXTRA C DE TABLE NO.? 1
CODE 0 * 10288
8
I
INS MODE
I
NOTE 1:
NOTE 2:
NOTE 3:
During Insert mode, the display will show
INS MODE, and the position to the left of
the cursor is filled in with the new
character.
The cursor is indicated by a box around the
character at the present cursor position in
the example above.
The use of the cursor keys removes the
programmer from Insert Mode.
l
Example of DEL (delete):
0
Depress DEL :
NOTE 1: The use of delete causes the character under
the cursor to disappear and all characters to
the right shift left.
NOTE 2: The cursor is indicated by a box over the
character at the present cursor position in
the example above.
700 - 28