user manual

ND-20292
CHAPTER 7
APRIL, 1990
Examples are provided below.
1. Selecting a function from the LCR Main Menu:
l With the LCR Main Menu displayed
l Depress 1, then depress CR (RETURN).
l The program for DOWN LOAD is loaded from
the floppy disk. A example of the display is
shown to the right.
At this time, any table to be down loaded can be
selected.
NOTE: Only one table can be loaded into the computer
at a time. This applies to all functions.
2.
Selecting a table from a Function Menu:
l With the Modify Menu displayed:
a Depress 1, then depress the CR (RETURN)
key.
SAMPLE LCD INDICATIONS
***LCR MAIN MENU***
1 DOWN LOAD
6
PRINTOUT
2 UP LOAD
7
SYSTEM DATA CLEAR
3 VERIFY
4 MODIFY
t
ZN?~ZNU NO. [il
10 SYSTEM .CONTROL
PROGRAM LOADING
I
***DOWN LOAD***
1 AREA CODE TABLE 6 EXTRA CODE TABLE
2 WEEKLY SCHEDULE 7 OFFICE CODE TABLE
3 DAILY SCHEDULE
8 HOME NPA CODE
4 ROUTE ADVANCE
5 ROUTE TABLE
ENTER MENU NO. q
10 ALL DATA
***MODIFY***
1 AREA CODE TABLE 6 EXTRA
2 WEEKLY SCHEDULER ; ;gFF;
3 DAILY SCHEDULER
4 ROUTE ADVANCE
5 ROUTE TABLE
ENTER MENU NO. 0
SYSTEM DATA LOADING
700 - 31