user manual

ND-20292
CHAPTER 7
APRIL, 1990
The options and key in numbers are:
SAMPLE LCD INDICATIONS
1 - Down Load
2-UpLoad
3 - Verify
4 - Modify
5 - Display
6 - Print Out
7 - System Data Clear
10 - System Control
NOTE: Key in numbers 8 and 9 are not used.
Selecting any of the options above (except System
Control) results in the display of a second menu.
0
750.9.1
1.
2.
3.
4.
With the Main Menu displayed, depress the
number of the desired function and press CR
(RETURN) key.
General Explanation of LCR Main Menu
Options
Down Load
The Down Load option is used to transfer data
from the floppy disk to the LCR-E ETU. It should
not be confused with normal loading which is from
the floppy disk to the computer. This option is
generally used after data has been changed on the
floppy disk. No change to the actual working
memory on the LCR-E ETU occurs until this
procedure is completed.
Up Load
The Up Load option is used to transfer data from
the LCR-E ETU to the floppy disk. This option is
generally used to retrieve the actual programmed
data presently in the LCR-E ETU. This might be
done to check the actual contents of the LCR-E
ETU.
Verify
The Verify option is used to compare the contents
of the LCR-E ETU to the contents of the floppy
disk. This option is used after a down load or up
load to verify that the transfer of data just
completed was completed properly and no problem
was encountered that was not caught by the
computer. Also this option can be used to check
that a floppy disk contains the latest program
presently in the LCR-E ETU.
Modify
The Modify option is used to change the data in the
floppy disk. This option is the main function used
by the programmer in customizing the LCR
program.
It should be noted that this option
changes only the data in the floppy disk, not in the
LCR-E ETU.
***LCR MAIN MENU***
1 DOWN LOAD 6 PRINT OUT
f ;!RtiAD
7 SYSTEM DATA CLEAR
4 MODIFY t
5 DISPLAY
ENTER MENU NO 141
10 SYSTEM CONTROL
700 - 34