user manual

ND-20292
CHAPTER 7
APRIL, 1990
6. Display
The Display option is used to allow the
programmer to view the contents of the data
presently in the floppy disk. This option does not
allow changing of data, and is used only to confirm
the present data.
6. Print Out
The Print Out option is used to send table data to a
printer for purposes of having a hard copy. This
option is recommended to be completed as the last
step after veritication of proper LCR function, to
obtain a hard copy of the LCR program.
The office code table can be printed as
follows: with the PRINT OUT menu in
the display, depress r1 and ml
Enter the start table number and
depress ml . Example 001.
WY%54
Enter the end table number and
depress [?I . Example 002.
7. System Data Clear
The system data clear option is used to clear data
from the tables. This option clears the data in the
floppy disk, & the LCR-E ETU. The option is
provided to clear only one table at a time.
8. System Control
The system control option is used to restart the
LCR-E ETU. This option is recommended for use
after any changes are made to the programming in
the LCR-E.
750.9.2 Command Descriptions
In general, commands from the main menu result in
the display of a second menu (except for system
control). This menu is a listing of the available tables.
Programming is done on a per table basis.
SAMPLE LCD INDICATIONS
***OFFICE CODE TABLE PRINT***
TABLE NO. FROM
***OFFICE CODE TABLE PRINT***
TABLE NO. FROM
001
TO
***OFFICE CODE TABLE PRINT***
TABLE NO. FROM 001
I
SYSTEM DATA LOADING 0
I
OFFICE CODE TABLE PRINTOUT START
q
700 - 35