user manual

ND-20292
CHAPTER 7
APRIL, 1990
NOTE 1:
NOTE 2:
NOTE 3:
NOTE 4:
NOTE 5:
The previous display is an example of area
code data being verified between the floppy
disk and the LCR-E ETU. The name of the
selected table will be shown in the display.
Exceptions to Note 1, are the office code
table and all data verify selections. These
are shown at right. These two selections,
due to their large memory requirements,
show darkened boxes to indicate the relative
amount of data that has been transferred or
verified.
If no problem is encountered during verify,
the display shown (or one similar to it) is
provided. Depression of the CR (RETURN)
key is required to return to the verify menu.
If a problem is encountered during verify,
the display shown (or one similar) is
provided. Depression of the CR (RETURN)
key is required to return to the verify menu.
It is recommended that the RS232C cable
between the LCR-E ETU and the computer
be checked prior to performing a verify.
4. Modify Mode
The modify mode is used to make changes to the
LCR data base in the floppy disk. In this mode the
programmer customizes the LCR program to
accommodate the need of the system user. With
the LCR Main Menu displayed, depress 4, then
depress CR (RETURN). The Modify program is
now loaded from the floppy disk. An example of
the display is shown to the right.
The programmer is given the option to select the
table to be modified. Only one table type can be
modified a a time. The following pages provide an
example of each table as it is being modified, and
the associated displays provided by the computer.
Before making any program changes, it is
recommended that the programmer have a
complete listing of all desired data clearly written
down for easy reference while programming LCR.
SAMPLE LCD INDICATIONS
OFFICE CODE TABLE VERIFY START
w
AREA CODE TABLE VERIFY START
NORMAL END +-I
ABNORMAL END (OFFICE CODE TABLE)
***MODIFY***
1 AREA CODE TABLE
6 EXTRA CODE TABLE
2 WEEKLY SCHEDULER
7 OFFICE CODE TABLE
3 DAILY SCHEDULER
8 HOME NPA CODE
4 ROUTE ADVANCE
5 ROUTE TABLE
ENTER MENU NO.
700 - 38